December 21, 2025
If your vehicle creaks and squeaks when you drive down the road, it may mean that some of the metal parts are rubbing against each other and need to be lubricated. Those could be parts of the suspension, steering system and the drivetrain.
Years ago, most vehicles had to have their chassis (what you think of as the frame) regularly lubricated. Newer vehicles are made with what some call "lifetime lubrication," but there are still parts of the chassis that need to be maintained with lubricants. Your service advisor can help you know when that needs to be done.
In your owner's manual, the vehicle's manufacturer lists components that need regular maintenance. Things like u-joints, steering joints, sway bars, bushings and joints in the suspension. Some of them may have that "lifetime lubrication," while others may not. When you bring your vehicle in for service, a technician will look for any parts that have grease fittings. They will inspect these components, clean the fittings so dirt and other contaminants won't be forced into the part and then lubricate them with a lubricant that meets the manufacturer's specifications.
Sometimes a chassis lubrication is done at the same time as an oil change. That's also an ideal time for the technician to check other parts of your vehicle that may need attention. That could include greasing other parts such as the fuel door, trunk and door hinges, suspension springs and door latches.
Times have changed since the days when a "lube" job was synonymous with an oil change. Depend on your owner's manual and advice from your service advisor to know when "grease" is the word—and appropriate for your vehicle.
Tuffy Tire & Auto Service Lincoln
1525 Pine Lake Rd
Lincoln, Nebraska 68512
402-421-1900
http://www.tuffylincoln.com

March 29, 2026
Your vehicle gets its power from burning fuel, usually gasoline, and it counts on something called fuel injectors to send gas to the engine in a spray that is easy to ignite. Its a precise operation, and when its working well, you have plenty of power and an efficient engine. But after time, con... More

March 22, 2026
If your vehicles power goes to the rear wheels, then you have something called U-joints in the drivetrain. U-joints are connectors that allow the rotating power from your vehicles engine to deliver its power through a driveshaft to make the rear wheels rotate. You need U-joints because the surfa... More

March 15, 2026
If your vehicle has an internal combustion engine, it depends on two things to make propulsion power for you to be able to motor on down the road: fuel and air. The engine mixes the two in just the right proportion so that they can be ignited, creating a series of tiny explosions that are coordi... More